3M Versaflo Filters Explained: Types, Differences and When to Replace Them

3M Versaflo Filters Explained: Types, Differences and When to Replace Them

in News

3M Versaflo filters are designed to protect workers against specific airborne hazards, including dust, particulates, gases and vapours. However, choosing the correct filter can be confusing, particularly as different filters are designed for different Versaflo powered air respirator models.

The correct filter depends on both the powered air unit you use and the contaminants you need protection against. The TR-300 uses the TR-3712 particulate filter, while the TR-600 and TR-800 are compatible with the TR-6310 A2P and TR-6580 ABE2K1HgP combination filters.

In this guide, we'll explain the differences between 3M Versaflo filters, what each type protects against and how to identify the right replacement. We'll also cover when filters need changing and why using fresh, suitable filters is essential for maintaining respiratory protection.

How Do 3M Versaflo Filters Work?

3M Versaflo filters are an essential part of a powered air-purifying respirator (PAPR) system. They remove specific airborne contaminants from the surrounding air before it is delivered to the wearer through a breathing tube and compatible headtop or facepiece.

The powered air unit draws contaminated air through the attached filter, which captures or removes the relevant contaminants depending on its filtration technology. The filtered air is then supplied to the wearer, helping provide respiratory protection in environments where airborne hazards may be present.

However, not all Versaflo filters work against the same contaminants. The type of filter fitted determines what substances the system is designed to protect against, making it important to select the correct filter for the working environment.

How the Filtration Process Works

The process can be broken down into three main stages:

  1. Air intake: The powered air unit draws surrounding air into the system.
  2. Filtration: Air passes through the filter, which captures particulates or removes specified gases and vapours.
  3. Air delivery: Filtered air travels through the breathing tube and into the compatible headtop or facepiece, providing a continuous supply of filtered air.

Why Does the Filter Type Matter?

Different filters are designed to deal with different airborne hazards. Using the wrong filter can leave the wearer exposed to contaminants that the filter is not designed to remove.

The main filtration types include:

  • Particulate filters: Capture airborne particles such as dust, mists and fumes.
  • Gas and vapour filters: Use specialised filter media, such as activated carbon, to remove specified gases and vapours.
  • Combination filters: Combine particulate filtration with gas and vapour filtration to protect against multiple types of contaminants.

For example, the TR-3712 is designed for particulate filtration, while the TR-6310 and TR-6580 combine particulate filtration with specified gas and vapour protection.

This is why identifying the substances present in your working environment is just as important as knowing which Versaflo unit you own.

Important: Always select filters based on a workplace risk assessment and 3M's approved filter selection guidance. Not every filter is suitable for every airborne hazard.

Understanding the Different Types of 3M Versaflo Filters

When choosing a filter, it is important to understand the different types of filtration and what each one protects against. 3M filters use classifications to identify the contaminants they can filter, with some designed for particulates and others for specific gases, vapours and particles.

Particulate Filters (P)

Particulate filters capture solid and liquid particles that are airborne before they enter the respiratory system. This can include dust, fumes and other hazardous airborne particles.

They are commonly used in environments where workers may be exposed to:

  • Construction and demolition dust.
  • Wood dust from cutting and sanding.
  • Metalworking and grinding fumes.
  • Industrial dust and airborne particles.
  • Certain manufacturing processes.

They work by trapping particles within specialised filter media as air passes through them. Particulate filters do not provide protection against gases and vapours, so a different filter classification may be required where these hazards are present.

Gas and Vapour Filters (A, B, E and K)

Gas and vapour filters are designed to remove specific gaseous contaminants from the air you breathe. Unlike particulate filters, they use specialised filtration materials, commonly activated carbon, to retain certain chemical substances.

Different classifications indicate which groups of gases and vapours a filter is designed to protect against.

Classification Protection Against
A Certain organic gases and vapours with boiling points above 65°C.
B Certain inorganic gases and vapours.
E Certain acid gases and vapours.
K Ammonia and certain ammonia derivatives.
Hg Mercury vapour.

The number following a letter indicates the filter capacity class. For example, an A2 filter has a higher capacity classification than an A1 filter.

Combination Filters (Gas, Vapour and Particulate)

Combination filters bring together different filtration technologies to protect against multiple types of airborne contaminants.

For example, an A2P filter combines:

  • A2 filtration: Protection against specified organic gases and vapours.
  • P filtration: Protection against specified airborne particulates.

This makes combination filters useful in working environments where employees may encounter both chemical vapours and airborne particles.

The 3M Versaflo range covered in this guide includes two combination filters:

  • TR-6310 (A2P): Organic gas and vapour protection alongside particulate filtration.
  • TR-6580 (ABE2K1HgP): Protection against a wider range of specified gases and vapours, alongside particulate filtration.

When Should You Replace 3M Versaflo Filters?

It is vital to replace your 3M Versaflo filters regularly to maintain the protection the PAPR system is designed to provide. Over time, filters accumulate contaminants or gradually lose their ability to remove certain gases and vapours. Continuing to use exhausted filters can expose workers to hazardous substances and potentially cause serious health problems.

Not all filters show obvious signs when they need changing. While a particulate filter may become increasingly difficult to breathe through as it loads with contaminants, gas and vapour filters can become exhausted without any visible changes.

Particulate filters capture airborne contaminants within their filter media. As these particles accumulate, airflow resistance can increase, making it harder for the powered air unit to maintain the required airflow.

Signs that a particulate filter may need replacing include:

  • Filter loading warnings: The powered air unit indicates that the filter is becoming loaded.
  • Reduced airflow: The unit cannot maintain the required airflow during its checks.
  • Increased resistance: The filter has accumulated contaminants and is restricting airflow.
  • Visible damage: The filter housing, seal or filter itself is damaged.
  • Contamination: The filter has been exposed to substances or conditions that make it unsuitable for continued use.

Always follow the unit's airflow checks, alarms and manufacturer's replacement instructions. If the required airflow cannot be maintained, leave the contaminated area and investigate the cause before using the equipment again.

Need to Replace Versaflo Filters in Bulk?

Ordering replacement filters for your workforce? Contact our team for help choosing the right 3M Versaflo filters and discussing bulk business requirements.

Get in Touch

How to Choose the Correct 3M Versaflo Replacement Filter

Choosing the correct replacement filter for your 3M Versaflo powered air respirator involves more than simply matching a product code. You need to identify your powered air unit and understand which airborne contaminants you need protection against.

Using an incompatible filter or one that isn't suitable for the hazards present can compromise your respiratory protection. Follow these three steps to identify the right filter.

Step 1 – Identify Your 3M Versaflo Model

First, check which powered air unit you own. The TR-300, TR-600 and TR-800 use different filter ranges, so identifying your model is essential before purchasing a replacement.

Powered Air Model Compatible Filters Covered in This Guide
TR-300 TR-3712
TR-600 TR-6310, TR-6580
TR-800 TR-6310, TR-6580

Always check the model number on your powered air unit before ordering. Don't assume filters are interchangeable between different Versaflo series.

Step 2 – Identify the Airborne Hazards

Next, consider the contaminants present in your working environment.

  • Dust, mists and fumes: A suitable particulate filter may be required.
  • Organic gases and vapours: Look for an appropriate A-class filter.
  • Inorganic gases and vapours: A suitable B-class filter may be necessary.
  • Acid gases: Check whether E-class filtration is required.
  • Ammonia: Look for K-class protection.
  • Mercury vapour: Check for a filter specifically classified for mercury vapour.

Where multiple contaminants are present, a suitable combination filter may be necessary.

The correct selection should always be based on a workplace risk assessment, the substance's properties and concentration, and the manufacturer's approved filter guidance.

Step 3 – Select a Compatible Replacement Filter

Once you've identified your powered air unit and the hazards involved, you can narrow down your replacement options.


Filters for TR-300

3M Versaflo TR-3712 particulate filter for TR-300 powered air respirators.

Buy Now

Filters for TR-600 & TR-800

3M Versaflo TR-6310 A2P combination filter for specified gases, vapours and particulates.

Buy Now

Filters for TR-600 & TR-800

3M Versaflo TR-6580 ABE2K1HgP combination filter for specified gases, vapours and particulates.

Buy Now